Intake Valve (Black Nitride w/ Anti Friction Coating / 37.5mm 1mm Over) These valves are 1MM larger than stock, great for ported heads that need more flow through the valves. These stainless steel valves are lighter than the stock steel valves and...

Exhaust Valve (Black Nitride w/ Anti Friction Coating / 30.5mm - 1mm Over) These valves are 1MM larger than stock, great for ported heads that need more flow through the valves. These Black Nitride valves are lighter than the stock steel valves and...

Turbo Discharge Gasket (CT20) This is a replacement for the OEM turbo discharge gasket for 22RET engines with the CT20 Turbo. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

K&N Filter Care Service Kit (Aerosol / 99-5000) K&N Recharger Kit 99-5000 is designed to service your K&N oiled cotton air filter when it gets dirty. The kit comes with K&N Power Kleen air filter cleaner and K&N air filter oil. The 99-5000 Recharger...

K&N Sealing Grease (99-0704) K&N Sealing Grease 99-0704 provides an airtight fit around sealing surfaces on all types of air filter elements. It resists heat and will not melt or run off. K&N Sealing Grease is designed to ensure the filter stays sealed...

Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...

Intake Valve Seat (20+ Lbs of Boost) 40mm Pro Valve Seats are made of Nickel Aluminum Bronze material for extra long life in performance engines. With track proven results the machine-ability, longevity, and thermal conductivity far surpass the stock...

Spring Seat Shim Set (Single Spring / .025″) Hardened Valve Spring Shims for 2RZ and 3RZ with Single Street Performer Valve Springs. NOTE: Sold as a set of (16). Contact our Tech Support Line for further information at 928-575-2174...

Fuel Pressure Gauge (Carbureted 1.5" Diameter 0-10 Psi) These fuel pressure gauges are for carbureted engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable, rust-free, stainless steel bezel and case and...

Safety Auto Rod Bearing Set When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...

Brake Hard Line Kit (Left & Right) This caliper hard line kit is for straight axle Trucks and 4Runners only. This kit includes the caliper brake lines for both the right and left sides. NOTE: Not for IFS vehicles. Contact our Tech Support...

Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...