Model

Intake Manifold Gasket (Lower / 4 Port) LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage...

Front Balancer Seal (OEM) New OEM quality harmonic balancer seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. Contact our Tech Support Line for further information at 928-575-2174...

Shim Kit Shim kit for setting up gears in 6.7" Celica differentials to get the correct gear mesh pattern. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with...

Oil Pump Crankshaft Front Seal New OEM quality Oil Pump Crankshaft Seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. Contact our Tech Support Line for further information at...

Valve Cover Gasket This valve cover gasket features precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the...

O-Ring (Oil Pump) The oil pump O-ring seals and mates the surfaces to keep oil in its respective place. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. OEM Toyota Part #:...

GT25R Turbo Inlet Gasket (Metal) A Stainless Steel inlet gasket for the GT25 turbos that we use in our CT20 conversion kit. For between the turbo manifold and the GT25 turbo or our adaptor and the GT25. Contact our Tech Support Line for further...

Injector Connector So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or effective. This injector connector is just what you need. It...

Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...

Pulley Bolt (Front Balancer) OEM Toyota front crank hub bolt fits all 2RZ and 3RZ engines. We recommend replacing the balancer bolt any time you replace the front balancer. OEM Toyota Part #: 90105-16041 Contact our Tech Support Line for...

OE Breather Hose (Front Of Valve Cover) OE Toyota hose comes off the valve cover and goes to intake manifold. Replaces OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part...

Rear Inner Axle Seal Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time you remove the axle. Contact our Tech Support Line for...