Model

Valve Cover Hardware Kit Valve cover hardware kit includes (4) studs and (4) chrome acorn nuts, for the 20R/22R/RE (all years). We also use the studs in this kit for mounting 1" spacers to adapters, nuts are not used. This product should not be used...

Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. This is part of the Pro Fuel Injection setup we offer. Contact our Tech Support Line for further information at 928-575-2174...

Brass Freeze Plug Set (7) At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to...

Thermostat (195 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...

Header Stud Set Replacing your Turbo manifold? It is a good idea to replace your studs too! LC Engineering offers nothing but the best quality components around. The factory exhaust manifold studs have a shoulder in the center that can interfere with...

2.75" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for Turbo Intercooler or Air! Dress up your engine compartment by replacing your air lines with the highest quality silicone hose available! Full vacuum through the...

Exhaust Gasket (Stainless) OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory...

Viton Valve Seals Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil...

Seal Saver (Rear Main) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank and...

Pro Titanium Retainer (Dual Spring) LC Engineering offers CNC machined retainers made from high strength, heat-treated titanium alloy. Designed to add strength while offering weight reduction. Perfect for high RPM, street, and race applications. It...

Silicone Adapter (2" to 2.5") Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

Throttle Position Sensor Plug (Sidedraft) This plug is only to be used with sensor, see Part #: 1061090, and is for the individual fuel injection throttle body set up that we sell, see Part #: 1061100. NOTE: This throttle position sensor plug will...