Model

Distributor Drive Gear Spacer When eliminating the fuel pump eccentric from the stock distributor, you will need this spacer to bring the drive gear back into alignment. This is an OEM core unit processed by LC Engineering. Only used on 22R when...

Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our Tech Support Line for further information at...

CT20 Turbo Oil Feed Line Washer (Block Side) This is a replacement for the OEM turbo Oil Feed Line Washer for 22RET engines with the CT20 Turbo. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Front Hub Star Gasket These gaskets come in extremely handy when rebuilding your front hubs. These star-shaped gaskets are used for the front cover of the 4wd hub assembly. OEM Toyota Part #: 43531-60010 Contact our Tech Support Line for...

Throttle Linkage (Nut & Tab Washer) Have you lost your linkage bracket nut? No stress LC Engineering has you covered. We offer this kit to make your life a little easier. It will include one M8 x 1.0 nut as well as one Tab Washer to keep it from...

OEM Mechanical Lock Nut (Exhaust Manifold) When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on...

22RE Fuel Pressure Damper Washer This fuel damper washer is a stock replacement for the worn out one. You will need (1) as well as (1) of these 1025050 washers for each damper. NOTE: Sold individually. Contact our Tech Support Line for further...

CT20 Turbo Oil Feed Line Washer (14mm Crush Washer) This is a replacement for the OEM turbo Oil Feed Line Washer for 22RET engines with the CT20 Turbo. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

OEM Distributor Hold Down Bolt As we all know, we tend to lose or misplace at least one bolt or nut when we are working on our vehicles. Well if you misplaced or damaged the distributor bolt, don’t worry we have you covered! This is an OEM...

Round Collector Exhaust Gasket (2-Bolt x 2" Flange) OEM style exhaust gaskets feature a carbon material and stainless steel fire ring for long life and a positive seal. These round collector gaskets are the same type we use for all of our street header...

OEM Bellhousing to Block Alignment Pin (1978-2016 4Runner/Celica/FJ Cruiser/Pickup) OEM Bellhousing to Block Alignment Pin. OEM Toyota Part #: 90250-10113 Contact our Tech Support Line for further information at 928-575-2174. Note:...

OEM Release Bearing Clip OEM Release Bearing Clip. OEM Toyota Part #: 31232-22010 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...