Model

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

OE PCV Valve This is a factory replacement, quality PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please...

Oil Drain Plug (Small) The LCE 20R/22R small oil drain plug is manufactured from high-quality materials to handle the most challenging conditions. LCE drain plugs and gaskets are the quality parts you need to do your job right. The head is 14mm, and...

Weber Carburetor Internal Fuel Filter Found on the underside of the Weber Carb (32/36 and 38 models) is an internal fuel filter that a lot of people overlook. If you have any fuel issues or contaminants found in your fuel system, be sure to replace...

Street Distributor Rotor An OE quality rotor with the brass center electrode for the best transfer of spark. This rotor fits the small 3" caps found on 20R works with th 1975 to 1978 clip style of cap or the 1979 20R screw type cap. Not for late model...

Air Filter Base Gasket Avoid or fix annoying air leaks by replacing the base gaskets between your carburetor and air cleaner. We recommend these gaskets to be in place so the carb is not exposed to dust and dirt coming into the engine. Contact...

Weber Main Jet (1.25) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We recommend Weber...

Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...

Pro Valve Shim (8mm Under Bucket / 1.45mm - 1.80mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.25mm - 2.60mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.65mm - 3.00mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 3.05mm - 3.30mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...