Go Rhino Sport Bar 2.0 (w/ Power Actuated Retractable Light Mount) Go Rhino’s Sport Bar 2.0 can be installed on a full-sized and mid-sized truck bed along with your favorite snap, roll up and some folding tonneau covers. Now it’s no...

Cross Drilled and Slotted Rotors A moving vehicle has a large amount of kinetic energy, the brakes have to absorb and dissipate this energy in order for the vehicle to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic...

Cross Drilled and Slotted Rotors A moving vehicle has a large amount of kinetic energy, the brakes have to absorb and dissipate this energy in order for the vehicle to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic...

Supercharger Install Kit This installation kit is for the 4.0L V-6 Supercharger Kit for the 2007-2009 Fj Cruiser models (Supercharger not included). NOTE: This supercharger will not work on the 2010-2014 FJ Cruiser. Additional parts required...

Supercharger Install Kit This installation kit is for the TRD 4.0L V-6 Supercharger Kit for the 2005-2015 Tacoma Trucks (Supercharger not included). NOTE: This supercharger will not work on any FJ Cruiser. For the FJ Cruiser install kit, see Part #:...

Valve Cover Hardware Kit Valve cover hardware kit includes (4) studs and (4) chrome acorn nuts, for the 20R/22R/RE (all years). We also use the studs in this kit for mounting 1" spacers to adapters, nuts are not used. This product should not be used...

EFI Intake Bolt (Long) M8-1.25 x 95mm Socket Head Cap Screw for use on EFI intake. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...

T3 Inlet Turbo Flange (4-Bolt) This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange. Don't see what you need? Just call our Technical Dept...

CNC Steel Header Flange (1 5/8") Steel header flange for custom fabrication of exhaust header on 2RZ or 3RZ engines. 1/2" thick flange with 1-5/8" ports. This header flange is the same one we use when constructing our headers in house. It will have a...

Garret T3 Exhaust Discharge Flange (5 Bolt) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. This 5-bolt flange fits standard 5-bolt T3/T4 turbo exhaust housings, including the turbos...

Weld On Bung & Plug Kit (Thread-In Bosch Style) If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge, you will need this kit. It comes with the bung (18mm...

Weld-On Oxygen Sensor Flange (2-Bolt Flange Style) This flange is made from 3/8" mild steel, then tapped for M8 x 1.25 studs weld on. For the 2 bolt style O2 sensor. NOT for thread-in O2 sensors. Contact our Tech Support Line for further...