Builder Series (Street Engine Kit) Toyota engines are known for their longevity. So it is no surprise to see some of these with 200,000 plus miles on them. Unfortunately, they will need some attention eventually, and that is precisely where LC...

Builder Series (Pro Engine Kit) Toyota engines are known for their longevity. So it is no surprise to see some of these with 200,000 plus miles on them. Unfortunately, they will need some attention eventually, and that is precisely where LC...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

D.U.I. Short Version Distributor (w/ Vacuum Advance) Performance Distributors one-piece ignition system, D.U.I. are three letters you cannot do without! The D.U.I. (Davis Unified Ignition) allows you to Drive Under the Influence of more power. The...

D.U.I. Short Version Distributor (w/o Vacuum Advance) This is a true race distributor with an upgraded coil, different cams inside the housing as well as different weights and springs. For racing applications only. Performance Distributors one-piece...

Engine Rebuild Oil Galley Plug Kit Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off after cleaning. LC Engineering can supply you with all these hard to find plugs. Most engines have some sort of...

Holley 350/500 to Weber Manifold (Adapter + Spacer Kit) We manufacture these billet aluminum carb spacers in house, to our specs. We use only the finest materials in our spacers to assure the quality you would expect from LC Engineering. These are CNC...

Pro Clutch + Flywheel Bundle Kit Kit Includes: Pro Clutch Kit (Pro Pressure Plate, Pro Clutch Disc, Throwout Bearing, Pilot Bearing and Alignment Tool) Flywheel of your choice OEM Pressure Plate Bolts OEM Flywheel Bolts Rear Crank Seal-Saver OEM Rear...

OEM Crankshaft Pulley (Outer) This Pulley is for vehicles equipped with power steering. If replacing your harmonic balancer, this will be a good idea to replace as well. This will bolt to the factory harmonic balancer and can be used when adding power...

Crankshaft Key Set (Woodruff Key) Crankshaft keys (also called Woodruff Keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...

OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...