Thermostat Housing Gasket
(Paper / Flat)
Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a paper gasket that offers an excellent seal for your thermostat housing...
Oxygen Sensor Gasket
(2-Bolt Style)
This gasket is a direct replacement for 2-bolt O2 sensors. If you have to replace the O2 sensor, you should replace the gasket as well to avoid pesky exhaust leaks.
Contact our Tech Support Line for further...
Manifold Adapter Gasket
(Holley Adapter To 20R)
Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket...
Medium Oil Galley Plug
(1/4"-19 BSPT)
Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need four of these for the crankshaft and one for the inside of the block under the oil filter...
Spring Seat Shim
(.015″ / .030" / .060")
Hardened Valve Spring Shims for Pro and Street Performer Valve Springs. When installing new valve springs, it is very crucial to get the springs all set up equally for proper valvetrain geometry and longevity...
DCOE Jet Cover Gasket
LC Engineering offers only genuine Weber/Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment.
Contact our Tech Support Line for further information at...
Oil Drain Plug Gasket
(Small)
This is the oil drain plug gasket for LC Engineering's small oil drain plug Part # : 1013117.
OEM Toyota Part #: 90430-12031
Contact our Tech Support Line for further information at 928-575-2174.
Note:...
Small Oil Galley Plug
(1/8"-28 BSPT)
Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two for the passenger side of the block. LC Engineering can supply you with all these hard to...
Crankshaft Key
(Woodruff Key)
Crankshaft keys (also called woodruff keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...
Oil Drain Plug Gasket
(Large)
This is the oil drain plug gasket for LC Engineering's large oil drain plug Part #: 1013114.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes...
Power Valve Gasket
These replacement gaskets ensure the best seal for your Holley power valve.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not...
Crush Washer
This Crush Washer is a stock replacement for the worn out ones on the Cold Start Injector on Toyota engines. Sold as each. You will need (2) for each cold start injector.
NOTE: Sold individually.
Contact our Tech Support Line for...