FJ Cruiser

Differential Drop Spacer Kit (Rear Sway Bar) Reduce body roll, understeer, and generally sloppy handling with one of these Addco anti-sway bar kits. The bar is made from high-carbon steel and is hardened and stress-relieved to give your suspension...

Supercharger Belt Look no further; we offer the highest quality belts for your supercharger. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Viton Valve Seals Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil...

U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...

Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...

GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

T3 Inlet Turbo Flange (4-Bolt) This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange. Don't see what you need? Just call our Technical Dept...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Inner Spring (GenV CompGate40) All GenV wastegates come with a range of springs (3-26psi). These are Inner Spring options available in these GenV CompGate40 Wastegates. Contact our Tech Support Line for further information at 928-575-2174...

Stainless Steel U-Bend (2 1/2") LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of stainless steel that we use in our Pro Flow exhaust systems...

2.00" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...