Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

Throttle Body Spacer Kit Airaid throttle body spacers feature a unique spiral bore that agitates the incoming air to promote better atomization of the fuel molecules, resulting in a more complete burn in the combustion chamber. These kits include a...

Tie Rod Boots (Pair) At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! These boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber...

HD Tie Rod Kit Stock steering on FJ80's just can’t keep up with today's off-roading. The stock Tie Rod is easily bent, causing problems on the trails. Don't get stuck on the trail! Upgrade your stock Tie Rod with Trail-Gear's Heavy Duty Tie Rod...

HD Steering Kit Bigger tires and a lifted suspension are necessities for off-roading today. Unfortunately, they cause feedback through the stock steering set-up. Trail-Gear has solved that problem with our FJ80 Steering Stabilizer kit. This kit will...

Type 0 Turbo Intercooler (31"x11.75"x3" / 3" Inlet / Outlet ) Features: Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM / 600 HP Pressure...

Type 1 Turbo Intercooler (31"x11.75"x3" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 2 Turbo Intercooler (31"x11.75"x4" / 3" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 7 Turbo Intercooler (29"x6"x2.5" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 11 Turbo Intercooler (19.75″x12″x3.5″ / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and...

2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...