Fuel Injector Top Grommets This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets. NOTE: Sold as a set of (4). Contact our Tech Support Line for...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

T-Bolt Hose Clamp (You Choose Size) Our T-Bolt clamps are all 100% Stainless Steel to stand up to all weather conditions to protect against corrosion. Each clamp has rounded smooth band edges to prevent cutting into you silicone hoses. Engineered and...

Pro Valve Shim (8mm Under Bucket / 1.45mm - 1.80mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.25mm - 2.60mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.65mm - 3.00mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 3.05mm - 3.30mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Tie Rod Boots (Pair) At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! These boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber...

Pro Valve Shim (8mm Under Bucket / 1.85mm - 2.20mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

NGK Spark Plug R5672A-8 (10-18 Psi / 14:1 Comp) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage...

NGK Spark Plug R5671A-10 (30+ psi of Boost) NGK's V-grooved center electrode moves the spark to the outer edge of the electrode for improved ignitability in all combustion chamber conditions. This configuration is especially helpful for throttle...

Hub Outer Dial O-Ring (Aisin Manual Hubs) There is a small rubber O-ring located between the inner and outer hub dials. If this ring becomes damaged water and dust can leak into the hubs. It can also make turning the dial difficult. Easy to install...