1.5" Wheel Spacers These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on...

2.0" Wheel Spacers These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on...

Turbo Insulating Kit This insulating kit is designed to fit most turbos. Reduces turbo lag and keeps under hood temperatures cooler. Comes complete with easy-to-follow instructions and all of the materials necessary to complete the job of insulating...

T3 Inlet Turbo Flange (4-Bolt) This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange. Don't see what you need? Just call our Technical Dept...

Garret T3 Exhaust Discharge Flange (5 Bolt) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. This 5-bolt flange fits standard 5-bolt T3/T4 turbo exhaust housings, including the turbos...

Weld On Bung & Plug Kit (Thread-In Bosch Style) If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge, you will need this kit. It comes with the bung (18mm...

Weld-On Oxygen Sensor Flange (2-Bolt Flange Style) This flange is made from 3/8" mild steel, then tapped for M8 x 1.25 studs weld on. For the 2 bolt style O2 sensor. NOT for thread-in O2 sensors. Contact our Tech Support Line for further...

Stainless Steel U-Bend (2 1/2") LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of stainless steel that we use in our Pro Flow exhaust systems...

Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...

2-Bolt Flange (2 1/4") Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. Contact our Tech Support Line for further...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Fuel Injector Top Grommets This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets. NOTE: Sold as a set of (4). Contact our Tech Support Line for...