K&N Air Filter Oil (99-0516) K&N 99-0516 is a 12.25 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air...

K&N Air Filter Oil (99-0504) K&N 99-0504 is a 6.5 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air filtration...

5/8" High Temperature Hose (Order By The Foot) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 5/8" hose is perfect as an oil drain line for your turbocharger. Sold by the foot if...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

Type 0 Turbo Intercooler (31"x11.75"x3" / 3" Inlet / Outlet ) Features: Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM / 600 HP Pressure...

Type 1 Turbo Intercooler (31"x11.75"x3" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 2 Turbo Intercooler (31"x11.75"x4" / 3" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 7 Turbo Intercooler (29"x6"x2.5" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 11 Turbo Intercooler (19.75″x12″x3.5″ / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and...

2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...