MLS Head Gasket (LH Only) (94mm Bore x .040" Thick) The cylinder head gasket is arguably the most important seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this...

MLS Head Gasket (RH Only) (94mm Bore x .040" Thick) The cylinder head gasket is arguably the most important seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this...

MLS Head Gasket Set (94mm Bore x .040" Thick) The cylinder head gasket is arguably the most important seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this...

Head Gasket Set Head gasket failure is one of the most common problems with Toyota 3VZ engines. With a cast iron block and aluminum cylinder heads, add a little heat, and you have two entirely different metals expanding and contracting at different...

Pro Head Studs LC Engineering always recommends replacing the old used head bolts with new ones to ensure the correct head torque. The ARP 5VZ Cylinder Head Stud Set is a must for engines with increased cylinder pressure from high compression, nitrous...

OE Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...

OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 5VZ. If you are...

OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 3VZ. NOTE: Parts...

Pro Head Studs The ARP Cylinder Head Stud Set is a must for engines with increased cylinder pressure from high compression, nitrous oxide, turbocharged and supercharged applications. Made from 8740 Chromoly Steel, these studs test out at over 190,000...

PCV Grommet New PCV grommet for valve cover on 2RZ and 3RZ engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. NOTE: This is a part for the Pro Fuel Injection (SDS) setup we offer, not factory set-ups. Contact our Tech Support Line for further...

Uncoated 2RZ/3RZ Valve Cover w/ Baffle (1995-1999) The LC Engineering OEM Toyota valve cover with baffle is an excellent way to personalize your 1995-1999 2RZ/3RZ engine. Available in Red, Black or uncoated. We also have valve cover gaskets sets...