ULTIMATE Lift Hood Strut Kit
(93-98 T100)
Our new ULTIMATE Lift Hood Strut Kit for the ’93-98 T100 eliminates the prop rod and makes your engine compartment free and clear of obstacles.
One-handed hood opening and closing â€" the struts lift...
1-Bar Map Sensor
(No Boost)
Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...
Pro Fuel Map Sensor
(SDS)
Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up to...
Main Bearing Set Coated
(0.25mm / +.010")
Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...
16" Flex Fan
(Blue)
Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex...
K&N Replacement Air Filter
(33-2064)
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...
K&N Universal Clamp-On Air Filter
(RU-1500)
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications...
OEM Main Bolt Set
Time to replace those main bearing cap bolts while rebuilding your bottom end? No problem, we have you covered, order this complete set of 10 main cap bolts.
Contact our Tech Support Line for further information at 928-575-2174...
"Boost Tee" Boost Controller
(You Choose Color)
By far the easiest and most cost-effective way of controlling the amount of pressure going to the wastegate is via a Gated Boost Control Valve. All Turbosmart Gated Boost Controllers are manufactured...
OEM Connecting Rod Bolt
To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These rod...
Street Tune-up Kit
A tune up kit that won't break the bank for your 2RZ or 3RZ from LC Engineering. Give your 95-97 2RZ/3RZ an ignition tune up with our kit that includes four NGK spark plugs BKR5EYA, a set of NGK Spark Plug Wires, distributor cap...
Street Piston Ring Set
(Standard / 93.5mm)
LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with cast iron, chrome-plated, barrel faced top compression rings. They have conventional...