Valve Keepers It is recommended to use hardened valve keepers every time you re-build your engine. LC Engineering carries hardened valve keepers for all 3VZ valves using stock Toyota retainers or Street Performer retainers. A must for any high RPM...

Valve Cover Gasket Set These valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to...

5/8" High Temperature Hose (Order By The Foot) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 5/8" hose is perfect as an oil drain line for your turbocharger. Sold by the foot if...

Spring Seats (Dual Spring) Hardened Valve Spring Shims for 2RZ and 3RZ Street Performer Dual Valve Springs. NOTE: Sold as a set of (16). Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

OE Harmonic Balancer This is an OE replacement harmonic balancer for 3RZ engines. Throughout your engine's life, the elastomer in the factory balancer can deteriorate, causing a decrease in performance and possible engine vibration. Replace the old...

Valve Keeper It is recommended to use hardened valve keepers every time you rebuild your engine. LC Engineering carries hardened valve keepers for all 3VZ valves using stock Toyota retainers or Street Performer retainers. A must for any high RPM...

Chevy Transmission Adapter Plate Kit (5º Offset) LC Engineering's custom transmission adapter kit is designed to mate a Toyota 2RZ/3RZ Tacoma engine to any GM Turbo-Hydromatic (350 or 400), 700R or Powerglide transmission bell housing. Perfect for the...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

Type 0 Turbo Intercooler (31"x11.75"x3" / 3" Inlet / Outlet ) Features: Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM / 600 HP Pressure...

Type 1 Turbo Intercooler (31"x11.75"x3" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 2 Turbo Intercooler (31"x11.75"x4" / 3" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...