1/4" 90 Degree Fitting
(Push-Lok to -4AN Swivel)
LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 90 degree fitting is used for the oil feed line at the turbo or block. Perfect for...
2" Silicone Coupler
Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following temperature range:...
Plug Wire Separator Kit
(8.5mm Pro Wires)
These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires. They...
OEM PCV Valve Grommet
This is an OEM Toyota 3VZ PCV valve grommet.
OEM Toyota: 90480-18001
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not...
Intake Manifold Gasket
(Plenum)
LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs! This gasket is the...
OEM PCV Valve
(Steel)
This is an OEM Toyota 3VZ PCV valve.
OEM Toyota: 12204-65010
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not represent the...
OEM Exhaust Manifold Stud
When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on your truck may be 20...
Denso Iridium IK22 Spark Plug
These 2 step colder plugs are recommended by URD if you are running the 7th Injector upgrade on a Supercharged 5VZ engine. If you are running the stock pulley (Low Boost) on the 5vz supercharger, Magnuson recommends...
Flexplate Bolt
(OEM)
Connect that flexplate with confidence. This OEM flexplate bolt is just what the doctor ordered to replace your flexplate bolt that you lost or misplaced. They have a black oxide finish to help resist rust and corrosion...
PCV Valve
(OEM)
This is a factory replacement PCV valve.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact...
Hardware Kit
(Exhaust Flange)
Exhaust hardware kit used on the two-bolt collectors in the header and exhaust kits.
Kit Includes:
(4) Mechanical locking nuts (M10 x 1.25mm)
(4) Flange Bolts (M10 x 1.25mm x 40mm grade 10.9)
NOTE: All hardware is...
Exhaust Valve
(Steel / 35mm - Stock Size)
If you're looking for replacement valves for your Toyota 3VZ engine, then these high-strength steel OE type replacement valves are just right for you. These valves utilize the factory size valve seats and valve...