Tacoma

Supercharger Pulley (70mm / Smog Legal) Our 3RZ smog-legal superchargers feature a smaller 70mm pulley to reduce the boost down to approx. 4.5 psi. This pulley size is required for CARB exemption (smog legal) on 95-01 3RZ 2.7L Superchargers...

Supercharger Pulley (73mm / Smog Legal) Our 2RZ smog-legal superchargers feature a smaller 73mm pulley to reduce the boost down to approx. 4.5 psi. This pulley size is required for CARB exemption (smog legal) on 95-01 2RZ Toyota's. NOTE: For a...

Fuel Pressure Gauge Kit Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? The new 95-04 2RZ/3RZ fuel gauge kit is the answer to those questions. This kit comes with everything you...

Street Tune-up Kit A tune up kit that won't break the bank, for your 3.4L 5VZ from LC Engineering. Refresh that ignition system on your engine by replacing a couple of the most important and expensive parts of it. Stock Replacement. Kit...

Double Gauge Full Pillar (Gray) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close on on the "vitals" of your engine. Most drivers want to see water temps, oil...

Drop-In Replacement Air Filter  (Various Engines & Models Please Refer To Fitment Guide) Product Highlights- Manufactured in the USA using proprietary 4-step molding process to ensure the highest quality.- Specially formulated sensor-safe oiled...

Drop-In Replacement Air Filter  (3.5L V6 2GR) Product Highlights- Manufactured in the USA using proprietary 4-step molding process to ensure the highest quality.- Specially formulated sensor-safe oiled filtration media traps particles as small as 5...

Upper Control Arm Bushings These DJM bushings are a replacement bushing for 1995-2004 Toyota Tacoma's utilizing the DJM Suspension kits. They maintain proper alignment under extreme conditions on and off-road and during competition. Helps provide...

Flexplate Bolt Kit (OEM) Connect that flexplate with confidence. These OEM flexplate bolts are just what the doctor ordered to connect your flexplate to your engine. They have a black oxide finish to help resist rust and corrosion. Recommended to be...

2RZ / 3RZ Modified EGR Tube (1995-2004 / Anderson Engineering) The EGR extension will be welded in place to allow for OEM EGR system to operator as normal. The tube used is 0.750" OD with a wall thickness of 0.062" (Stainless Steel 304) to offer...

Main Bolt Set Time to replace those main bolts while rebuilding your bottom end? No problem, we have you covered, order this complete set of (8) main bolts. Contact our Tech Support Line for further information at 928-575-2174. Note:...

Connecting Rod Bolt To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the stock rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Rod...