Spring Seats (Dual Spring) Hardened Valve Spring Shims for 2RZ and 3RZ Street Performer Dual Valve Springs. NOTE: Sold as a set of (16). Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

OE Harmonic Balancer This is an OE replacement harmonic balancer for 3RZ engines. Throughout your engine's life, the elastomer in the factory balancer can deteriorate, causing a decrease in performance and possible engine vibration. Replace the old...

Differential Drop Spacer Kit (Rear Sway Bar) Reduce body roll, understeer, and generally sloppy handling with one of these Addco anti-sway bar kits. The bar is made from high-carbon steel and is hardened and stress-relieved to give your suspension...

Chevy Transmission Adapter Plate Kit (5º Offset) LC Engineering's custom transmission adapter kit is designed to mate a Toyota 2RZ/3RZ Tacoma engine to any GM Turbo-Hydromatic (350 or 400), 700R or Powerglide transmission bell housing. Perfect for the...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

38 1/4" Drag Link The Tacoma Drag Link is 38 1/4" long and works with our Rock Assault™ Left-Hand Drop Front Axle Housing with 59" WMS to WMS. This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Front Shackle Kit Hanging leaf springs from your Tacoma can be very difficult, especially when it comes to the shackles. The frame is thin and there are not many complete shackle kits available on the market, while the kits that are available are...