Rear Frame Reinforcement Plates 1995-2004 Tacomas have c-channel frames that are notorious for bending and cracking. The c-channel frame also contributes to axle wrap and wheel hoop at the rear axle. Toyota’s answer to this issue was to box in...

Rear Frame Box Kit 1995-2004 Tacomas have c-channel frames that are notorious for bending and cracking. The c-channel frame also contributes to axle wrap and wheel hop at the rear axle. Trail-Gear’s answer to this problem is to box in and...

Frame Plate Kit (w/ IFS Box Mount) If you plan on doing or have already performed a solid axle conversion on your early model '95 1/2 to 2004 Tacoma, then you will need our Taco Frame Plate/IFS Box Mount kit. This kit not only provides your frame with...

Rock Sliders (Bolt-on) Trail-Gear now offers fully welded Rock Slider kits for Tacoma Extra-cab Pickups. Made from 1 3/4" X .120" wall DOM tubing. Kit includes 4 legs with gussets on each slider for easy, bolt-on installation. We recommend welding...

Rock Defense Rear Bumper6 Lug 4wd or PreRunner Only These rear bumpers are made in the U.S.A. and one of the strongest bumpers in the industry. Our Rock Defense bumpers are made out of 100% DOM tubing. The 1.75" OD X .120" wall thick DOM tubing will...

Type 0 Turbo Intercooler (31"x11.75"x3" / 3" Inlet / Outlet ) Features: Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM / 600 HP Pressure...

Type 1 Turbo Intercooler (31"x11.75"x3" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 2 Turbo Intercooler (31"x11.75"x4" / 3" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 7 Turbo Intercooler (29"x6"x2.5" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 11 Turbo Intercooler (19.75″x12″x3.5″ / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and...

2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

2.5" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...