3.0" Cooling Pipe
(Pre-Intercooler)
Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...
Safety Auto Main Bearing Set
When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification and ready for the miles to come...
Oil Drain Line
(Stainless Steel Braided)
Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...
Street Tune-up Kit
A tune up kit that won't break the bank for your 2RZ or 3RZ from LC Engineering. Give your late 1998-2000 2RZ/3RZ an ignition tune up with our kit that includes four NGK spark plugs BKR5EYA and a set of NGK Spark Plug Wires. Not For...
Rock Slider Mounting Kit
Our gusset kits include 3/16" thick plate steel for the frame and triangle corner gussets. This plate welds to the frame and the rock slider welds to the plate.
Kit Includes:
(8) plates
(8) gussets
This product should...
Differential Armor
(Weld On)
Protect your differential gears from unnecessary damage. Trail-Gear now offers weld on differential Armor for 1995-2004 Toyota Tacoma, and 2000-2013 Toyota Tundra. Precision Laser Cut from 1/4" A36 Steel, then CNC formed to...
Timing Belt Tensioner
(Mechanical)
This is a replacement timing belt tensioner for the 3.4L 5VZ V6. It is recommended to replace both the Belt Tensioner and timing belt together.
Contact our Tech Support Line for further information at...
Drop-In Replacement Air Filter
(4.0L V6 1GR)
Product Highlights- Manufactured in the USA using proprietary 4-step molding process to ensure the highest quality.- Specially formulated sensor-safe oiled filtration media traps particles as small as 5...
Clutch Slave Cylinder
The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...
Rod Bearing Set
(Coated)
Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically.
Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with little or no...
Oil Pump Cover
OEM oil pump cover for 3RZ. LC Engineering recommends replacing the cover anytime you have experienced debris going thru the motor or a catastrophic failure.
OEM Toyota Part #: 15115-75020
NOTE: For 2RZ/3RZ oil pump cover allen...
Balance Shaft Bearings
Replacement balance shaft bearings for 3RZ or 2TR engines.
NOTE: Sold as a set of (4).
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only...