Tacoma

Clutch Slave Cylinder The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...

OE Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...

Sway Bar Relocation Bracket (ReadyLIFT) The thick CNC machined link body design incorporates left and right turn heim end links that allow for easy adjustment, even in a moment's notice should you feel the need to adjust the sway bar setting. We...

Exhaust Valve (Inconel / 31.5mm - 1mm Over) These valves are 1MM larger than stock, great for ported street heads that don't need the huge 2.5mm oversized valves. These Inconel valves are lighter than the stock steel valves and are extremely heat...

+1MM Exhaust Valve (Inconel / 32.50MM) These valves are 1MM larger than stock (stock valves are 31.50MM), and great for ported street heads. These Inconel valves are lighter than the stock steel valves and are extremely heat resistant; These are a...

Exhaust Gasket OEM Toyota gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory style gaskets. Traditional paper exhaust gaskets do not last as long as the factory style...

Trail Gear Rock Ripper Air Filter 8.8" (Replacement) This is the replacement air filter for the Tacoma 3.4Liter Extreme Rock Ripper Air Filter 8.8" kit, This filter is interchangeable with K&N filter RU-3050. NOTE: For the precharger for this...

Trail Gear Rock Ripper Air Filter 5" (Replacement) This is the replacement air filter for the Tacoma 2.4Liter Extreme Rock Ripper Air Filter 5" kit, This filter is interchangeable with K&N filter RU-4600. NOTE: For the precharger for this filter,...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

Cam Follower (35mm / Shim Under Bucket) These 35mm cam buckets are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of...