-
Oil Drain Line (Stainless Steel Braided) Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...$59.52
-
(1) NGK V-Power Spark Plug LFR7AIX2309 (1 Heat Range Cooler than Stock) NGK iridium plugs represent the ultimate evolution of spark plug technology and performance. The iridium center electrode is both stronger and harder than platinum. This allows NGK...$11.85
-
Silicone Radiator Hose Kit The New Silicone Radiator Hose Kits will provide your engine with a one-of-a-kind advantage in performance and style. These kits are dual layered, combining high-grade silicone and heat-resistant embedded fibers which will...$135.06
-
Fuel Pressure Gauge "T" Fitting (5/16" Hose to 1/8" NPT) This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...$15.45
-
Pro Valve Shim (Under Bucket / 8mm x 2.40mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket style...$6.12
-
Pro Valve Shim (Under Bucket / 8mm x 2.45mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket style...$6.12
-
Master Rebuild Kit / MLS Head Gaskets Time to rebuild that tired engine but you are on a tight budget? No worries, LC Engineering has you covered! These Economy Master Rebuild Kits offer the high-quality parts you expect from LC but with a lower cost...$1,143.67
-
Pro Valve Train Kit (High Performance) LC Engineering has taken the guesswork out of your 5VZ valve train. These valvetrain kits will supply you with all the compatible parts to upgrade the valve train on your performance engine. The Pro 5VZ kit...$910.47
-
Pro Dual Valve Springs (Naturally Aspirated / Low Boost) The Pro Dual Valve Springs are a "must-have" upgrade when running bigger lift cams and higher RPM's. With 75lbs of seat pressure at a 1.400" install height and open pressure of 215lbs (at .450"...$257.45
-
Pro HD Dual Valve Springs (High RPM / Boost) The Pro Dual Valve Springs are a "must-have" upgrade when running bigger lift cams and higher RPM's. With 100lbs of seat pressure 1.400" install height and open pressure of 225lbs (at .450" lift) they will...$374.87
-
Pro Beehive Valve Spring & Retainer Kit LC Engineering has taken the guesswork out of choosing the right parts for your cylinder head! We have created a spring & retainer kit that comes with all the parts needed to upgrade your 1GR cylinder...$668.31
-
Pro HD Dual Valve Spring & Retainer Kit LC Engineering has taken the guesswork out of choosing the right parts for your cylinder head! We have created a spring & retainer kit that comes with all the parts needed to upgrade your 1GR cylinder...$720.95
-
fast shipping
Speed Delivery