Tundra

Oil Pump Crankshaft Front Seal New OEM quality Oil Pump Crankshaft Seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. Contact our Tech Support Line for further information at...

GT25R Turbo Inlet Gasket (Metal) A Stainless Steel inlet gasket for the GT25 turbos that we use in our CT20 conversion kit. For between the turbo manifold and the GT25 turbo or our adaptor and the GT25. Contact our Tech Support Line for further...

Injector Connector So... you've pulled off the connectors to your fuel injectors and managed to break one side of them. Now they won't stay on and that blob of RTV just isn't very pretty or effective. This injector connector is just what you need. It...

Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...

(1) NGK V-Power Spark Plug LFR7AIX2309 (1 Heat Range Cooler than Stock) NGK iridium plugs represent the ultimate evolution of spark plug technology and performance. The iridium center electrode is both stronger and harder than platinum. This allows NGK...

1/2" Pushlock To -8AN (45 Degree Swivel AN Fitting) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil drain at the turbo or oil pan. Perfect for going...

K&N Air Filter Cleaner (99-0606) K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. The 99-0606 Air Filter Cleaner will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to...

K&N Air Filter Oil (99-0533) K&N 99-0533 is an 8 ounce squeeze bottle of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air...

Oil Fitting (28BSPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block. This is a steel fitting that will come in a silver or...

5/8" High Temperature Hose (Order By The Foot) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 5/8" hose is perfect as an oil drain line for your turbocharger. Sold by the foot if...

Weld-On Oxygen Sensor Flange (2-Bolt Flange Style) This flange is made from 3/8" mild steel, then tapped for M8 x 1.25 studs weld on. For the 2 bolt style O2 sensor. NOT for thread-in O2 sensors. Contact our Tech Support Line for further...

Rubber Tailpipe Hanger (2-Hole) Factory replacement rubber insulator for tailpipe. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...