-
Teflon Heat Isolation Gasket (Intake) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate for...$17.99 -
Oil Pan Gasket New oil pan gasket fits 20R, 22R, and 22RE engines from 1975-1984 with proper pan flanges. OEM quality for the best possible seal. NOTE: Gasket style flanges have a "dimple" up towards the block to "pinch" the gasket and create the...$17.84 -
Brass Freeze Plug At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...$17.60 -
Underdrive Belt (6" Street Kit) This belt is used on the LC Engineering Pulley Kit for the 6" Water Pump and the 4" Crank Pulley with alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$17.55 -
Piston Stop (Adjustable) These Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. This stop will work in all vehicles that have a 14mm spark plug thread...$17.18 -
Water Block Plate (Under EFI Manifold) This water block off plate goes under the intake manifold on fuel-injected 22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$16.66 -
Intake Manifold Stud Kit (Carbureted) This kit comes with all new studs to mount your carbureted manifold to your cylinder head. Replacing your stock intake bolts with studs will allow you to remove and reinstall your manifold numerous times without...$16.50 -
OEM Balancer Bolt We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with a large flange. The bolt size is m16 x 1.50. It is recommended to use...$16.01 -
Underdrive Belt (Pro 7" Kit) This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley without alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$15.49 -
Underdrive Belt (Pro 7" Kit) This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley with alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$15.47 -
OE Valve Cover Gasket Set This is a OE replacement 3VZ valve cover gasket set. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product...$14.96 -
Grommets & Washers (Sway Bar End Link) Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway end link grommets offer the greatest improvement in performance handling on trucks...$14.95
-
fast shipping
Speed Delivery