-
Flip Socket (19mm / 21mm) For installing wheels and spacers, this is the right tool for the job. 13/16" (21mm) on one end and 3/4" (19mm) on the other. Thin wall design fits better than standard sockets. Especially handy for custom wheels with tight...$24.99 -
Weld-On Attachment Point (Flat) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3" axle tube, and this one has a flat bottom...$24.99 -
Weld-On Attachment Point (Coped) Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is flat on the bottom so that it can be welded on to a plate, tubing, or any other flat surface, and...$24.99 -
Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...$24.84 -
Aluminized Heat Sheath (1.25" x 3') This aluminized sleeving reflects heat from wiring and hoses. Heat Sheath is easily cut to length. For use on cars, street rods, and trucks. This product should not be used in a manner that violates Federal EPA...$24.82 -
Micro Activation Switch & Bracket This micro-switch and bracket enables performance enthusiasts to activate solenoids, fuel pumps, and most anything else. A micro throttle switch can be used as either the primary method of activating a Nitrous...$24.57 -
Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...$24.22 -
OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...$24.22 -
Piston Ring Installation Pliers This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save time and money. Contact our Tech Support Line for...$23.94 -
Trail Shovel (Recovery & Utility) The Recovery Utility Tool (RUT) is a fully functional collapsible Military Style shovel with easy grip and light handle with carbon steel blade that is heat treated for high strength and features double serrated...$23.78 -
Coolant Temp Sensor Connector This coolant temperature sensor connector is a replacement for 1989-1995 22RE applications. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$23.51 -
Air Injection Block Plate Kit This plate kit will block off the holes on top of the exhaust manifold or header. Kit Includes: (2) Stainless Steel plates (2) Gaskets NOTE: Not for use on smog checked vehicles, fits LC Headers or header flanges...$23.50
-
fast shipping
Speed Delivery