Manual Locking Hubs The (89-95) models with ADD (Automatic Differential Disconnect) have created a whole new reason for installing manual hubs. These models are not equipped with locking hubs, consequently the CV joints spin whenever the vehicle is in...

Manual Hub Conversion Kit This kit is a must when converting from Toyota Automatic Hubs to Manual Hubs. This kit includes special locking nuts and plates that are necessary to lock the wheel hub and rotor onto the spindle when converting to manual hubs...

Round Hub Gasket (Front Hub) This OEM Toyota gasket comes in handy when rebuilding or replacing your hubs. It goes at the base of the locking hub assembly. If you plan on working on your front end have one ready to go as they seem to always rip. OEM...

Front Hub Star Gasket These gaskets come in extremely handy when rebuilding your front hubs. These star-shaped gaskets are used for the front cover of the 4wd hub assembly. OEM Toyota Part #: 43531-60010 Contact our Tech Support Line for...

Unit Hub (Dana 60 / 9" Housing) These unit hubs are not just another aftermarket 1-ton unit hub that has been machined down and modified from an 8 lug to a 6 lug application. This hub has been designed for a specific application, so these 1-ton unit...

Longfield Chromoly Hub Gears Set (Inner and Outer / IFS) When you run bigger tires, you put more strain and wear on your axles and hubs creating more failure points. Keep your rig running problem-free with Longfield OEM replacement hub gears made...

Hub Outer Dial O-Ring (Aisin Manual Hubs) There is a small rubber O-ring located between the inner and outer hub dials. If this ring becomes damaged water and dust can leak into the hubs. It can also make turning the dial difficult. Easy to install...

Aisin Manual Locking Hubs (Set) Engineered to exacting OE specifications, Aisin free wheel hubs efficiently transfer and disconnect drivetrain power to the front wheels of part-time 4WD vehicles. Compact in design and durable enough for the toughest...