Six Shooter Knuckles (Crossover Steering) Over a year in development and testing, this new knuckle design sets a new standard in Toyota knuckle strength and reliability. This kit totally eliminates the problem of broken steering knuckles and studs. The...

Reservoir Filter Kit When you have invested thousands of dollars into your full hydraulic steering system, you will want to protect it with the best reservoir and filter that you can get. That is why Trail-Gear has developed our new Rock Assault™...

1650Psi Power Steering Pump (w/ Pulley) Trail-Gear’s new Power Flow 1650 psi pump has been designed and engineered to provide ultimate performance. The body of the pump is constructed of steel to increase reliability and decrease wear. It is...

Solid Axle Knuckle Service Kit (w/ Wheel Bearings) When was the last time you serviced your knuckles? This service kit contains all standard replacement parts including gaskets, felts, seals, washers and shims. Kit includes inner axle seals and outer...

Tie Rod Kit Trail-Gear has made the perfect kit for building tie rod links for use with a double-ended ram. Based on our testing and experience with kits like these, we know that the failure point is always in the tie rod ends, which is why Trail-Gear...

Clevis End Kit Our Clevis End Kit is the most complete and affordable kit on the market. All hardware is included along with the necessary spacers. The Clevis ends are clear zinc-plated for a sharp look and long lasting finish. This kit will fit most...

Ram Mounting Kit (Double Ended) This kit will take almost all the fabrication work out of mounting your Rock Assault Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on...

Solid Axle Knuckle Service Kit (w/o Wheel Bearings) When was the last time you serviced your knuckles? This service kit contains all standard replacement parts including gaskets, felts, seals, washers and shims. Kit includes inner axle seals and outer...

Steering Pump Kit Hoses This kit contains one high pressure and three low pressure power steering lines. These lines are used to connect the pump, steering box and cooler together. The two hoses that go from the steering ram to the steering box are not...

Flat Pitman Arm This Pitman Arm is a solid forged flat arm, no drop, one piece design, and features a FJ80 tapered hole. Ideal for use with crossover steering and custom applications. NOTE: OEM Solid axle applications only. This product should not...

Stock Drop Pitman Arm This Stock Drop Pitman Arm is a solid one piece, forged design, and features a FJ80 tapered hole. For use with crossover steering and features the same drop as the factory pitman arm. This product should not be used in a manner...

Steering Columns 3 1/4 Inches: This steering column will allow you to use your existing Toyota steering linkage without having to buy a coupler and then cut and weld on your steering shaft. This steering column measures 3 1/4 inches from the base of...