-
Holley Fuel Pressure Regulator (1-4lbs) The regulator's job is to keep the pressure in the fuel system at a constant psi (Weber carbs work best in the 2.5-3psi range). Your fuel pressure regulator controls the amount and speed at which fuel is used by...$69.58 -
PCV Relocation Kit If you're running an aftermarket carburetor on your 20R or 22R engine and you wish to retain the PCV system, you'll need a new place to run your rear PCV hose since the stock connection is part of the stock carburetor base plate...$16.02 -
Base Gasket Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend this gasket to be replaced any time the carb is removed from the manifold. Contact our Tech Support Line for...$2.01 -
Holley Base Gasket Avoid annoying vacuum leaks and replace the gasket any time you remove the carburetor from the intake. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$2.11 -
Power Valve Gasket These replacement gaskets ensure the best seal for your Holley power valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...$1.03 -
Non-Stick Bowl Gasket Set These Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets. Contact our Tech Support Line for further...$20.30 -
Foam Float This float is an improved version from the plastic and older brass style floats. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...$28.85 -
Base Gasket (Pair) Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend these gaskets to be replaced any time the carb is removed from the manifold. NOTE: This part will include 2...$5.36 -
Gasket Set (Weber Adapter) Avoid or fix annoying vacuum leaks by replacing the gaskets between the plates the Weber 32/36 and 38 carb adapter. Over time gaskets become brittle and break. We recommend these gaskets to be replaced any time the adapter is...$11.89 -
O-Ring & Isolator Kit O-Ring and Isolator set for Weber sidedraft carburetors. Kit Contains: (2) Plastic O-ring plates (4) O-Rings (4) Springs NOTE: Each kit will only service (1) carburetor, make sure you order (2). Contact our Tech...$21.63 -
Sidedraft Carburetor O Rings New O-ring set to seal the sidedraft carburetors to the intake manifold using the plastic isolators. Eliminate pesky vacuum leaks from damaged O-rings. NOTE: This kit will do a single (1) sidedraft carburetor, make sure...$10.76 -
Carb Spacer Offenhauser To Weber) This carburetor spacer (1/2") thick, is for Weber carburetors. We use this spacer on the Offenhauser intake manifolds we sell. This spacer will allow for proper linkage hookup. Kit Includes: Spacer Hardware Gaskets...$42.80
-
fast shipping
Speed Delivery