-
Electric Fan Relay Set (w/ Sensor) Allows you to control what temperature the electric fan turns on (adjustable 180-240). Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$64.64 -
Connecting Rod Bolt Set (H-Beam Rod) To eliminate the chance of rod failure when building your motor we highly recommend replacing your rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro...$64.22 -
Street Tune-up Kit (w/ NGK Plug Wires) A tune up kit that won't break the bank, for your 1980 to1992 20R/22R/RE from LC Engineering. Included are four NGK spark plugs BKR5EYA, Set of NGK Spark Plug Wires, Distributor cap (black), and a good quality...$64.22 -
Aisin Fan Clutch (Pickup / 4Runner / Celica) Looking for a replacement fan clutch for your application? LCE has you covered and cooled with a replacement Aisin fan clutch. Contact our Tech Support Line for further information at 928-575-2174...$63.81 -
Axle Loop Trailer Strap Axle loop ratchet straps are a great way to attach your trail rig to the trailer. One end wraps around the axle housing, the other end clips to your trailer D-ring. Ratchet action allows for quick tightening. Strap material is...$63.07 -
Driveline Spacer 1.5" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$62.54 -
Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...$61.93 -
Haltech iC-7 Standard Dash Mount Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. Thats where this plate comes in, it makes life EASY. Grab yours today so you can spend your time doing what you...$61.80 -
Header Flange (You Choose Style) Steel header flange for custom fabrication of exhaust header on 20R, 22R, or 22RE engines. 1/2" thick flange with 1-1/2" or 1 5/8" ports. This header flange is the same one we use when constructing our headers in house...$61.75 -
Rod End (You Choose Size) Don't be fooled by look a like rod ends, they are not all the same. These rod ends are the strongest on the market, tested, and proven. The main body of this rod end is 100% 4340 chromoly and then finished with a zinc coating,...$60.68 -
Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...$60.58 -
Spring Hangers (Sloped / Welded) Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes...$60.50
-
fast shipping
Speed Delivery