-
1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...$98.89 -
Hall Sensor (Replacement) The Hall Sensor mounts on the front cover and uses magnets strategically mounted in the balancer pulley to generate a signal for proper ignition timing. Contact our Tech Support Line for further information at...$149.92 -
Fan Relay Electric fan relay upgrade for Pro Fuel Injection kits. Allows the computer in our Pro Fuel Injection kits to control your electric fan. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$36.00 -
Air Conditioning / Fast Idle Solenoid This solenoid can be used for one of two options; A/C or Fast Idle. The Fast Idle/ A/C Solenoid does not require an additional valve. The fast idle option consists of extra circuitry added to the ECU, a control...$101.71 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...$7.45 -
Fuel Pump Relay Fuel pump Relay for Pro Fuel Injection Kits. Required for the computer to turn on the electric fuel pump. Much easier than having an additional switch on the dashboard! Contact our Tech Support Line for further information at...$36.00 -
Knock Sensor Upgrade This is for the upgrade for the newest Pro Fuel Kits using the SDS computer. The upgrade will come with the Knock Sensor and adapter. Knock control allows the ECU to retard the ignition timing automatically if knocking is detected...$141.10 -
Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system. NOTE: Sold...$8.19 -
Pro Air Fuel Tuning Module (Mixture Meter) The Pro Tuning Module gives you the ability to adjust the fuel curve in your 22RE. If your Air Fuel Ratio shows lean, turn the tuning module to a richer setting, it's just that simple. Contact our Tech...$96.36 -
Distributor Drive Gear Spacer When eliminating the fuel pump eccentric from the stock distributor, you will need this spacer to bring the drive gear back into alignment. This is an OEM core unit processed by LC Engineering. Only used on 22R when...$3.66 -
Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our Tech Support Line for further information at...$3.59 -
Distributor Drive Gear This drive gear is what allows your distributor to mate with your camshaft. This drive bolts to the front of the cam gear. Must use either a mechanical fuel pump eccentric or our distributor drive spacer, see Part #: 1081025 if...$80.97
-
fast shipping
Speed Delivery