-
Coil Adapter Wire (20" Long) Have you updated the ignition on your 20R/22R/22RE/3VZ but haven't gotten around to replacing the distributor yet? No problem, LC Engineering has that special coil wire to connect a Fast Ignition to Stock Distributor...$21.69 -
Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. This is part of the Pro Fuel Injection setup we offer. Contact our Tech Support Line for further information at 928-575-2174...$21.37 -
Throttle Position Sensor Plug (Sidedraft) This plug is only to be used with sensor, see Part #: 1061090, and is for the individual fuel injection throttle body set up that we sell, see Part #: 1061100. NOTE: This throttle position sensor plug will...$20.55 -
D.U.I. Distributor Rotor This is the replacement rotor for the D.U.I. Distributors. Will only work with D.U.I. 4 Cylinder Distributors. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$15.40 -
Coil Wire Adapter (Converts To HEI Style End) This coil wire adapter is perfect for off road vehicles or other applications that see severe service. The clip on this adapter plug keeps the wire securely fastened to the coil, so when you're out bouncing...$12.45 -
Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...$12.36 -
Street Distributor Cap New OEM style replacement distributor cap. A must when changing spark plug wires. Distributor caps can develop carbon tracks that can wreak havoc on the electrical path inside the distributor cap and cause drivability issues...$10.77 -
Vacuum Advance Plug (Distributor) When removing the vacuum advance on your factory distributor, this plug will keep foreign debris from entering the hole and causing problems. Only for a Distributor with the vacuum advance removed, as in a race engine...$10.66 -
Single Wire O2 Sensor Relocation kit If your O2 location has moved due to an aftermarket header, this single wire kit will extend the lead on your current connection. Contact our Tech Support Line for further information at 928-575-2174...$10.66 -
Plug Wire Separator Kit Pro Wires (8.5mm) - Black These composite separators are held together with allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires...$10.66 -
Plug Wire Separator Kit (8.5mm Pro Wires) These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires. They...$10.25 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...$9.85
-
fast shipping
Speed Delivery