Power Flow 1650Psi Power Steering Pump (w/o Pulley) Trail-Gear’s new Power Flow 1650 psi pump has been designed and engineered to provide ultimate performance. The body of the pump is constructed of steel to increase reliability and decrease...

Crossover Steering Arms (4 or 6 Stud) Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong. Because we make them in lots of 1,000 at a...

Single-Ended Hydro Assist Rams Experience the benefits of hydro assisted steering with a range of rams for a full spectrum of applications. Our Single-Ended Ram models are available in 6" stroke versions for Toyota steering knuckles and 8" stroke...

Power Steering Reservoir When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock pump but is not adequate for...

Power Steering Fluid Cooler If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing an oil cooler in front of the...

by Trail-Gear

Crossover Steering Drag Link (You Choose Size) These heavy duty drag links are made from 1.25" x .250" wall DOM tubing. Precision tapped. Left side thread mark. Powder coat black finish. When installing a Rock Assault Front Axle Housing and using a hi...

Tie Rod (Choose Your Length) Trail Gear's heavy duty tie rods are made from 1.25" x .250" wall DOM tubing, precision tapped with a left side thread mark. Each rod is test fitted to ensure rod ends thread in with correct fit. Powder coat black finish...

Power Steering Pump Bracket Kit (Rock Assault) This pump bracket is designed to adapt our "TC" style power steering pumps to your 75-95 Toyota 20R/22R/RE/RET engine. This bracket will utilize the stock idler pulley for the power steering belt. NOTE:...

Steering Box Mount /Reinforcement (IFS Steering Box) If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing edges prevent frame cracking. Heavy duty design with a...

Power Steering Pump Pulley (V-Belt) This pulley is designed to fit our standard or full hydraulic power steering pumps. NOTE: Not designed for the stock pump. This product should not be used in a manner that violates Federal EPA Laws. Contact...

Power Steering Reservoir Bracket (Trail Gear) This Reservoir Bracket makes it easy to bolt in the reservoir on most 4cyl 4X4 Toyota applications from 1979 - 1995. Includes mounting hardware. NOTE: Does not include reservoir. Unpainted finish...