Chromoly Pitman Arm
Available in a 3/4" less than stock drop and flat versions. Tapered for either a Toyota FJ-80 TRE. or Chevy 1 Ton ends.
Pitman arms fit either Toyota Hilux IFS steering box or FJ-60 Land cruiser box.
We offer the GM tie rod ( 2010 R-L ) and drag link tapers ( 2026-2027 RL)
Allows for fine tuning of steering with no core charge and no risk of breaking a modified stock pit man arm.
Note that the 3/4" and the flat pitman arm are 3/8" shorter than the stock pit man arm measurements from center of sector shaft to center of tie rod end.
Length from center of sector shaft to center of tie rod end hole is 5.825" eye to eye.
3/4 drop arm has 1.5" drop total.
Flat arms have using a taper will have a relief machined on the end. 3/4 bore is solid.
These are designed to work with our Toyota steering arms which are slightly shorter than other companies arms, which allows pushing the axle forward.
Arms are CNC machined from chromoly in the USA! Please allow 2-4 days lead time due to demand. We spline these when time allows as they are extremely time consuming to spline!
Factory style drop pitman is shown for reference. Also available in multiple tapers in our Toyota steering section.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-505-2501.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1979-1985 Pickup (4x4)
- 1981-1985 4Runner (4x4)
- 1986-1995 Pickup (w/ Solid Axle Swap)
- 1986-1995 4Runner (w/ Solid Axle Swap)