Toyota High Steer Kit
Kit includes Sky's Stage 6 billet Toyota chromoly High Steer steering arms, tie rod, drag link, FJ-80 ends, jam nuts, and pitman arm adapter
If you chose to add a stock replacement pitman arm in the options, the pitman arm adapter will be replaced with an FJ-80 end.
If you have a modified pitman arm all ready we offer a kit with just the FJ-80 ends as well.
All USA made steel links and Chromoly steering arms. Links are 1.250" .250 wall DOM tube, threaded 23mm with ends installed to insure correct fit and threads.
Sky Manufacturing steering arms have properly machined conical tapers. This allows them to hold torque over other arms. We have also machined these for a medium rate " Ackerman Angle". Being shorter they turn tighter than most arms
Sky Manufacturing also has shortened the tie rod/ drag link to king pin distance, increasing turning radius, eliminating tie rod to drag link interference, and allowing springs with more arch. 6.5" from king pin to drag link and 4.5" from tie rod to king pin.
NOTE: Cross over steering requires at least a 4 inch suspension lift!
Contact our Tech Support Line for further information at 928-505-2501
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1979-1985 Pickup (4x4)
- 1981-1985 4Runner (4x4)
- 1986-1995 Pickup (w/ Solid Axle Swap)
- 1986-1995 4Runner (w/ Solid Axle Swap)
