High Steer Kit
Kit includes Sky's Toyota billet steering arms, Tie Rod, Drag Link, all tie rod ends, jam nuts, a pit man arm adapter, and an IFS Steering box, Stabilizer kit and Heavy Duty Box mount kit.
Arms are USA CNC machined Chromoly steel, life time warranty against cracking, snapping, bearing pin failure. Does not cover failure to keep steering knuckle studs tight. We check them daily on the trail. Sky's steering arms have a polished conical washer finish that seats much better than the cast arms on the market.
Links are 1.250" .250 wall USA DOM tube, threaded 23mm with ends installed to insure correct fit and threads.
Heavy duty box mount is USA made, laser cut USA steel, not die stamped off shore parts.
High Steer requires at least a 4 inch suspension lift without using a flat pit man arm and turning the steering box vertical.
Tie rod ends are a non grease able version, we have had much better luck with these then the Russian/Indian grease able version. Fact is, tie rod ends are a wear item, carry spares on the trail.
Steering box is a cleaned, pressure tested, inspected box, 86-95, if you would like a specific year, please call for availability.
Factory box, inspected for wear, cracks, leaks, twisted splines, cleaned. Pit-man arm is included though condition is not covered. We do have a new Forged pit man option as well.
NOTE: Cross over steering requires at least a 4 inch suspension lift! Box has 90 day WARRANTY from purchase date against leaks.
Contact our Tech Support Line for further information at 928-505-2501
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1979-1985 Pickup (4x4)
- 1981-1985 4Runner (4x4)
- 1986-1995 Pickup (w/ Solid Axle Swap)
- 1986-1995 4Runner (w/ Solid Axle Swap)
