STEERING

Single-Ended Hydro Assist Rams Experience the benefits of hydro assisted steering with a range of rams for a full spectrum of applications. Our Single-Ended Ram models are available in 6" stroke versions for Toyota steering knuckles and 8" stroke...

Tie Rod Kit Trail-Gear has made the perfect kit for building tie rod links for use with a double-ended ram. Based on our testing and experience with kits like these, we know that the failure point is always in the tie rod ends, which is why Trail-Gear...

OE Steering Stabilizer To reduce steering vibrations at higher speeds, a steering stabilizer can be very helpful. LC Engineering offers an OE quality stabilizer to replace your worn out one. NOTE: Please verify that your vehicle has the same mounting...

Knuckle Rebuild Kit (w/ Wheel Bearings) Our FJ80 knuckle rebuild kit contains all of the replacement parts you need to service your steering knuckles including gaskets, felts, seals, spindle nut & washers, and shims. New spindle bushings, trunnion...

OEM Tie Rod Kit Left & Right (1996-2002 4Runner) A vital component within the front steering gear & link system, the tie rod end sub-assembly plays a significant role in the drive-chassis category of your Toyota car. This part helps in the smooth...

Clevis End Kit Our Clevis End Kit is the most complete and affordable kit on the market. All hardware is included along with the necessary spacers. The Clevis ends are clear zinc-plated for a sharp look and long lasting finish. This kit will fit most...

Ram Mounting Kit (Double Ended) This kit will take almost all the fabrication work out of mounting your Rock Assault Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on...

HD Tie Rod Kit Stock steering on FJ80's just can’t keep up with today's off-roading. The stock Tie Rod is easily bent, causing problems on the trails. Don't get stuck on the trail! Upgrade your stock Tie Rod with Trail-Gear's Heavy Duty Tie Rod...

Solid Axle Knuckle Service Kit (w/o Wheel Bearings) When was the last time you serviced your knuckles? This service kit contains all standard replacement parts including gaskets, felts, seals, washers and shims. Kit includes inner axle seals and outer...

Steering Stabilizer Kit (9.55" Stroke) To reduce steering vibrations at higher speeds, a steering stabilizer can be very helpful. We offer a stabilizer kit that attaches above the drag link. One end welds to the passenger side frame rail and the other...

Knuckle Stud Hardware Kit (Six Shooter Super Metal) Stronger and longer than stock Toyota replacement knuckle studs and more affordable than our Magnum Studs these studs will provide great strength without breaking the bank. Each stud is constructed...

Power Steering Reservoir When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock pump but is not adequate for...