Steering Knuckle Pull Scale A pull scale is helpful in setting up the shims on a knuckle. By increasing the shims above and below the knuckle the knuckle becomes tighter. When installing new knuckle bearings we recommend checking the shims with a pull...

ARP Heavy Duty Steering Knuckle Stud Magnum knuckle studs are stronger than any other stock replacement Toyota knuckle stud on the market. These heavy-duty studs are manufactured by world-renowned bolt manufacturer ARP (Automotive Race Products). Each...

Power Steering Pump Belt (Rock Assault) Replacement belt for Rock Assault power steering kits. Don't get caught out on the trail without a spare! This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support...

OE Rack & Pinion If your Tacoma rack & pinion steering is worn out, damaged or leaking we have the replacement rack you need. We are not using just any rebuilt unit, these rack & pinions are brand new!! That means less failure and better quality for...

Polyurethane Steering Rack Bushings Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed...

FJ-80 Tie Rod End (RH / LH Thread) Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. These rod ends are greaed for life and sealed. It will include the cotter pin and jam nut. M23 X 1.5 This product should not be used...

Stock Drop Pitman Arm This Stock Drop Pitman Arm is a solid one piece, forged design, and features a FJ80 tapered hole. For use with crossover steering and features the same drop as the factory pitman arm. This product should not be used in a manner...

IFS Steering Box (Remanufactured) High quality remanufactured IFS boxes for your crossover steering. We carry both newer and older styles. For crossover steering on (1979-1985) trucks we recommend the early style box, but you can also use the late...

Steering Box Mount /Reinforcement (IFS Steering Box) If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing edges prevent frame cracking. Heavy duty design with a...

Solid Axle Knuckle Service Kit (w/ Wheel Bearings) When was the last time you serviced your knuckles? This service kit contains all standard replacement parts including gaskets, felts, seals, washers and shims. Kit includes inner axle seals and outer...

Knuckle Felt Protector Kit (Rock-Ring) We have had a lot of people tell us they don't like the stock inner felt plates because they are so thin and are easily damaged in the rocks. Well check out this trick solution... super heavy duty rings made from...

Steering Stabilizer Kit (9.55" Stroke) To reduce steering vibrations at higher speeds, a steering stabilizer can be very helpful. We offer a stabilizer kit that attaches above the drag link. One end welds to the passenger side frame rail and the other...