Street Performer Cylinder Heads
(w/o Camshafts)
LC Engineering has designed a perfect replacement for the 3.0L (3VZ V6) customer who is on a tight budget. These budget-minded heads start with a brand new casting, and then our cylinder head experts fit them with all brand new components (see below for a complete list of parts). We use stock sized steel intake and exhaust valves.
The head is then fitted with LC Engineering exclusive Street Performer valve springs. These spring provide a higher spring pressure along with a smaller diameter wire to allow the use of a higher lift cam without any coil bind issues. The valve train is finished off with Viton valve seals, hardened keepers, new Street Performer retainers and an exhaust stud kit so you can replace those old worn out exhaust studs.
No longer will you need to bother with trying to get a set of old heads machined flat to keep from blowing head gaskets! These heads have a perfectly flat surface, providing a perfect head gasket seal for years of problem-free service. To keep the price down these heads are not ported, but we do offer an alternative option if you are looking for a more performance-oriented cylinder head check out Part #: 1021083.
LC Engineering also offers our exclusive head stud set (Part #: 1024065) and our MLS head gaskets (Part #: 1024040 or Part #: 1024059) or you can get a complete kit with studs and an MLS head gasket set (Part #: 1024050).
NOTE: Customer will re-use their cams and buckets.
3VZ Street Performer Cylinder Heads Parts List:
- Brand new bare head castings 1021081 and 1021082
- Steel intake valves (stock size) 1023070
- Steel exhaust valves (stock size) 1023071
- Street Performer valve springs 1023238
- Viton valve seals 1023237
- Street Performer retainers 1023006
- Hardened valve keepers 1023235
- Exhaust stud kit 1045031
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1988-1995 3VZ 3.0L Engines
3 Reviews Hide Reviews Show Reviews
-
Great peace of mind and performance
Stock headgasket blew out. Top end rebuild was done using MLS gasket and performer heads and an ARB stud kit. This thing screams now. No worries about overheating or blowing out a headgasket.
-
Great heads.
I took it upon my self to tear apart a knocking motor in a 1995 4Runner I purchased. All the parts I needed I bought from LCE. I made the unfortunate mistake of over tightening my old heads and stripped them. New heads shipped quick came with perfect packaging and great parts to assemble. I have since finished my rebuild and she purrs like a cat. Huge thanks to the LCE team in keeping these rigs alive I am an Lce customer for life. You folks are a one stop shop
-
Street Performer Heads
Head fit perfectly on my existing block. Exhaust stud kit installed very easily, stud kit for the head kit was worth the expense for ease of installation.
