Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...

3 Hole Spring Perches When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches...

Rear Shackle Mounts If you're installing longer rear springs you may need to relocate your rear shackle mount. You can do this by cutting off the original units with a die grinder and then welding them back on. You can also cut off the old ones and...

Shackle Bolt (Greasable) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. NOTE: Bolt is M18 x 150mm. For use with Trail Gear...

Shackle Nut (Stover) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. NOTE: Nut is M18 thread pitch. This product should not...

Shackle To Frame Bushing (Front & Rear) Is it time to replace your bushings on you Trail Gear Extra-Flex springs? These bushings go on the frame side of the spring shackle on both front and rear Extra-Flex springs. Alternate Bushings: Leaf spring...

Leaf Spring Bushing (Front) Is it time to replace your bushings on you Trail Gear Extra-Flex springs? These bushings fit the front Extra-Flex leaf springs. Alternate Bushings: Leaf spring bushing for rear springs, see Part #: 2053224. Leaf...

EZ Level Helper Spring Kit 550 Lb Hellwig's EZ Level medium duty helper springs are made with high quality Alloy Spring Steel, hot formed and heat treated for strength and durability. These are fully adjustable to insure improved side to side leveling...

EZ Level Helper Spring Kit 1500 Lb Hellwig's EZ Level medium duty helper springs are made with high quality Alloy Spring Steel, hot formed and heat treated for strength and durability. These are fully adjustable to insure improved side to side leveling...

EZ Level Helper Spring Kit 1500 Lb Hellwig's EZ Level medium duty helper springs are made with high quality Alloy Spring Steel, hot formed and heat treated for strength and durability. These are fully adjustable to insure improved side to side leveling...

EZ Level Helper Spring Kit 550 Lb Hellwig's EZ Level medium duty helper springs are made with high quality Alloy Spring Steel, hot formed and heat treated for strength and durability. These are fully adjustable to insure improved side to side leveling...

Polyurethane Steering Rack Bushings Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed...