Suspension Lift & Lower Components

18mm Shackle Mount (Pair) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint shackle mounts are...

Air Shock Hoop Mounting Kit Most link kits do not come with upper shock mounts because the exo-cage or tube work varies from truck to truck so much it is hard to determine where shock placement will occur. At Trail-Gear, we understand this issue all...

38 1/4" Drag Link The Tacoma Drag Link is 38 1/4" long and works with our Rock Assault™ Left-Hand Drop Front Axle Housing with 59" WMS to WMS. This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread...

U-Bolt Flip Kit Turns your Ubolts so they are facing up gaining you ground clearance under your axle and gets your Ubolts out of the rocks! We use quality clear zinc plated spring plates and Ubolts for a long lasting finish. Kit Includes: (2) Zinc...

Toytec 1" Block & U-Bolts Kit Includes: Solid T6 Aluminum blocks with pressed in steel pin. Includes new u bolts w/hardware, and two blocks. 1" lift block kit works with add-a-leafs and/or shackles for an additional inch of rear lift. Fits All...

Steering Stabilizer (Old Man Emu) Designed to reduce the effect of wheel vibration and improve the feel, handling and control of the vehicle, OME's steering stabilizers will also reduce the aggressive rotation of the steering wheel over rough roads...

Toytec Rear Add-A-Leafs Offering OEM Style anti-friction Pads, these are a long rear add-a-leaf for the best ride. This kit includes New Leaf Spring Center Pins. NOTE: If your 87-95 Pickup or 86-89 4Runner has 3.25" ID rear U-bolts, this kit will not...

+2" Rear Lift Kit (Add-A-Leaf ) Want to raise the rear of your Toyota Tacoma 2005-2012 Prerunner/4WD without ruining your suspension? LC Engineering is now offering a Tacoma Rear Add-A-Leaf to add additional height in the rear and support more weight...

Panhard Link Tubing (Front 3-Link) This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. This product should not be...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...

Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

Front 3-Link Panhard Bracket (Rock Assault) Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link...