Suspension Lift & Lower Components

Steering Stabilizer (Old Man Emu) Designed to reduce the effect of wheel vibration and improve the feel, handling and control of the vehicle, OME's steering stabilizers will also reduce the aggressive rotation of the steering wheel over rough roads...

Toytec Rear Add-A-Leafs Offering OEM Style anti-friction Pads, these are a long rear add-a-leaf for the best ride. This kit includes New Leaf Spring Center Pins. NOTE: If your 87-95 Pickup or 86-89 4Runner has 3.25" ID rear U-bolts, this kit will not...

Front 3-Link Lower Link Axle Bracket (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...

DJM Lowering Steel Block Kit (3" Rear) The hot set up for the rear of small and mid-size pick ups plus suv's where the axle is on top of the leaf spring is the good old lowering block kits. All kits have new U-bolts, nuts and washers! Contact our...

Differential Drop Spacer Kit (w/ Sway Bar) One thing often overlooked when lifting an IFS truck is the differential and axles. Most larger lifts will drop the differential down with brackets, but with smaller lifts (torsion bar lift, ball joint spacer...

Creeper Joints (1″ Thread / 9/16" Right Thread) These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball...

2.5" Energy Suspension Bump Stops Polyurethane Bump Stops Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Features: Low profile competition style bump stop...

Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...

Leafspring Bumpstops (w/ Extensions) Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. Bumpstops are 2" wide by 5 1/4"...

Creeper Joints (Choose Your Size) These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Driveline Spacer 1.5" (Longfield) Is your driveline too short after you do a lift? We have 1 inch and 1.5-inch spacers with bolts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...