-
Fuel Pressure Safety Switch Use this (5 Psi) fuel pressure safety switch (normally open) to control your car's fuel pressure and avoid the risk of shooting nitrous with too little pressure to supply the extra fuel required. You don't want to be...$82.29 -
Standard Bottle Heater NOS systems are calibrated for optimum performance with a bottle pressure of 900- 950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled to keep the bottle at 85 F. Powered by 12 Volt DC...$254.36 -
Nitrous Bottle Blanket (7" Diameter) Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of rugged, easily cleaned Nylon outer shell with insulation. It's...$70.27 -
Intercooler Spray Bar Kit (w/ Bottle) The Intercooler spray bar Kit's new snake design delivers 20% greater intercooler coverage area for improved cooling. Decreases intake air temperatures by 20 degrees F and allows you to safely run more boost for...$669.45 -
Intercooler Spray Bar This Intercooler spray bar has a new snake design delivers 20% greater intercooler coverage area for improved cooling. Decreases intake air temperatures by 20 degrees F and allows you to safely run more boost for more power. Cut...$281.14 -
10 oz. Standard Bottle Bracket NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating. Contact our Tech...$101.03 -
Turbo Insulating Kit This insulating kit is designed to fit most turbos. Reduces turbo lag and keeps under hood temperatures cooler. Comes complete with easy-to-follow instructions and all of the materials necessary to complete the job of insulating...$82.35 -
Crossbeam Connecting Rod Set LC Engineering's Crossbeam Rods are a custom made rod that has been designed for just about any application from stock style to high torque long rod engines. This is the best chrome-moly rod available. Crossbeam rods are...$1,277.15 -
Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...$24.67 -
Blow Off Valve Weld On Fitting (You Choose Material) All our blow-off valves come supplied with aluminum adapters but if you are using a steel intake tube you will need the steel weld-on adapter, Aluminum weld-on adapters are designed to work with...$16.17 -
Blow Off Valve Weld On Fitting (Race Port) This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves only. This adapter will not fit our Kompact series, Vee...$26.98 -
Turbo Oil Drain Plate (w/ 1/2" NPT Boss For Block Side) Provides a 1/2" NPT port for a custom oil drain fitting. Eliminates the need to use the hard-to-find factory thread fitting that comes from the factory. Contact our Tech Support Line for...$16.17
-
fast shipping
Speed Delivery