-
1 3/4" Radiator Cap (Small) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the small one that...$16.78 -
OEM Balancer Bolt We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with a large flange. The bolt size is m16 x 1.50. It is recommended to use...$16.01 -
Fuel Pressure Gauge "T" Fitting (5/16" Hose to 1/8" NPT) This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...$15.91 -
Weld On Bung & Plug Kit (Thread-In Bosch Style) If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge, you will need this kit. It comes with the bung (18mm...$15.40 -
Silicone Adapter (2.5“ I.D. to 2.75″ I.D.) Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...$14.99 -
Silicone Adapter (2.5 “ I.D. to 3.0″ I.D.) Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular...$14.99 -
OEM Fuel Suction Tube Set (Tacoma / Tundra / Sequoia) LC Engineering is now offering an OEM fuel suction tube set. This rubber gasket is used to seal the fuel pump hanger bracket to the gas tank. OEM Toyota Part #: 77169-04010 Contact our...$14.95 -
Grommets & Washers (Sway Bar End Link) Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway end link grommets offer the greatest improvement in performance handling on trucks...$14.95 -
Oxygen Sensor Install Kit (2-Bolt Style) This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you want it in the exhaust. Kit Includes: (2) Studs and...$14.29 -
2-Bolt Flange (2 1/4") Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. Contact our Tech Support Line for further...$14.29 -
Seal Saver (Rear of Crankshaft) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the...$14.02 -
2-Bolt Flange (You Choose Size) 2 1/4" Flanges: Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. 2 1/2"...$13.74
-
fast shipping
Speed Delivery