Water Block Plate Kit
(8 Bolt / Under Intake)
This water plate will fit on any 22R carbureted manifold with the 8-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the bottom of your manifold since there is an eight bolt design and an 11 bolt design. The block plate has a 3/8" npt hole in the plate to accommodate a heater or other accessory. This kit comes with a billet aluminum water plate, gasket, mounting hardware, 3/8" npt plug and 90 degree fitting with a 5/8" hose barb.
NOTE: If you have a manifold that requires an (11) bolt plate then you will need Part #: 1032010.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1981-1995 22R 2.4L Engines (w/ 8 bolt plate)
To open a printable PDF version of this instruction CLICK HERE
Due to the casting differences in the Offenhauser intake manifold some block plates will require a slight modification. This plate kit also includes a 3/8"npt plug and a hose barb fitting. The plug can be used to block off the plate or you can use the hose barb fitting to run to your heater core.
Installation:
- First mock up the block plate on the bottom of the manifold.
- Next install all bolts thru the block plate into the manifold - Do not tighten bolts only install them enough to engage the threads.
- Verify that all the bolts thread into the manifold easily and freely.
- If you find that one or more of the bolts are binding or not threading in properly you may have to open that bolt hole on the block plate slightly (DO NOT MODIFY THE MANIFOLD). LC Engineering recommends the use of a small file or drill bit. You should only have to clearance this hole a very small amount. Be careful not to take too much material off the block plate or you could experience a coolant leak.
- Once you clearance the bolt hole repeat steps 1-4 as necessary.
15 Reviews Hide Reviews Show Reviews
-
Perfect
Came with gasket and hardware was super easy to put on and works perfect
-
22re to 22r
I only purchased this after getting an offenhauser manifold not knowing I needed the plate. Works great no issues
-
Gost 671 give 5 stars
The Best Of The Best !!!
-
Satisfied customer!
Great quality part!!
-
PHILIPJOE PEREZ give 5 stars
-
.
.
-
Highest quality you can buy.
I'm pretty sure it had a glowing halo and angels were singing when I unpacked it. If it wasn't going on the car I would of framed it and hung it in the living room. Everything fit perfectly. Made the car look like a million bucks.
-
Really helps
The block plate really cleans up the engine bay ....I’m working on several other trucks
-
.
.