Connecting Rod Bolt Set (H-Beam Rod) To eliminate the chance of rod failure when building your motor we highly recommend replacing your rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro...

2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

2.5" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

3.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

Foam Sock Filters These filter socks fit all sidedraft carburetor air horns. Kit Includes: (2) Filters (2) Zip ties Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Carburetor Jet Kit (High Elevation) This kit is used to make the air/fuel mixture leaner. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean...

Oil Drain Line (Stainless Steel Braided) Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...

Weber 32/36 Jet Kit (High Elevation / Fuel Economy) This kit is used to lean the air/fuel mixture. A properly jetted carburetor that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of...

Air Cleaner Adapter Kit (Weber 32/36/38 Carb to K&N Air Filter) LC Engineering manufactures this adapter from billet 6061-T6 aluminum. This will allow you to use an aftermarket air cleaner on your Weber 32/36 or 38 carburetor. The adapter will go...

Weber 32/36 Jet Kit (Performance) This kit is used to richen the air/fuel mixture. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean fuel...

Pro Connecting Rod Bolt To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...

Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system for a quieter tone. This resonator features a high temp long...