1980

Weber Main Jet (Range: 1.15-1.55) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We...

Weber Main Jet (Range: 1.60-2.00) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We...

Weber Primary Idle Jet 0.40 ("Fat Jet / Range: 0.40-0.90) Weber calibrated idle jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results...

Weber Secondary Idle Jet ("Skinny Jet" / Range: 0.40-0.80) Weber calibrated idle jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the...

Weber Downdraft Air Correction Jet (Range: 1.35-1.80) Weber calibrated air correction jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the...

Weber Air Correction Jet (Range: 1.85-2.20) Weber calibrated air correction jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are...

NGK Spark Plug BKR5EGP (G-POWER PLATINUM) LC Engineering carries NGK G-Power Platinum spark plugs, they are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel...

NGK Spark Plug BPR5EGP (G-POWER PLATINUM) NGK G-Power Platinum spark plugs are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel efficiency. The small tip improves...

NGK Spark Plug R5671A-10 (30+ psi of Boost) NGK's V-grooved center electrode moves the spark to the outer edge of the electrode for improved ignitability in all combustion chamber conditions. This configuration is especially helpful for throttle...

8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...

Base Gasket (Pair) Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend this genuine Red Line Weber gasket to be replaced any time the carburetor is removed from the manifold...

Primary Idle Jet Holder (w/ O-Ring) This Weber jet holder holds the primary fat jet into the main housing on Weber 32/36 and 38 downdraft carburetors. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...