Catalytic Converter This is for the Early pickups that have a small pipe that comes off the catalytic converter. This cat will be 16 3/4" long with 2" flanges on both ends. While the majority of the Direct-Fit Catalytic Converter products do not...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Stainless Brake Lines (Stock Length) LC Engineering is proud to offer D.O.T. stainless steel braided brake lines with a gray PVC cover using hose lined with Teflon, making it compatible with all brake line fluids on the market today. These lines will...

Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...

Blow Off Valve Weld On Fitting (You Choose Material) All our blow-off valves come supplied with aluminum adapters but if you are using a steel intake tube you will need the steel weld-on adapter, Aluminum weld-on adapters are designed to work with...

Blow Off Valve Weld On Fitting (Race Port) This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves only. This adapter will not fit our Kompact series, Vee...

Turbo Oil Drain Plate (w/ 1/2" NPT Boss For Block Side) Provides a 1/2" NPT port for a custom oil drain fitting. Eliminates the need to use the hard-to-find factory thread fitting that comes from the factory. Contact our Tech Support Line for...

Turbo Heat Shield (Garrett T3-T4-GT30R) This stainless steel turbo housing heat shield comes with a raw finish. This drastically reduces radiant heat to protect other sensitive engine components with an easy 2 bolt installation. Contact our Tech...

Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. This is part of the Pro Fuel Injection setup we offer. Contact our Tech Support Line for further information at 928-575-2174...

Fuel Pump Eccentric When eliminating the fuel pump eccentric from the stock distributor, you will need this spacer to bring the drive gear back into alignment. This is an OEM core unit processed by LC Engineering. Only used on 22R when eccentric is...

Supercharger Belt Replacement 4-rib supercharger belt for the 22R/RE supercharger kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...

Supercharger Belt Replacement 6-rib supercharger belt for the 22R/RE supercharger kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...