20R/22R/RE Valve Adjuster Are you doing a valve adjustment on your 20R/22R/RE and need to replace the valve adjusters, look no further LC Engineering has you covered. NOTE: Sold individually. Contact our Tech Support Line for further information...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Base Gasket (Pair) Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend this genuine Red Line Weber gasket to be replaced any time the carburetor is removed from the manifold...

Vented Non-Cross Drilled Rotor Toyota Pick-Ups and 4Runners (86+) feature larger vented rotors from the factory. Earlier (79-85) trucks used solid, non-vented rotors up front along with smaller calipers. If you're installing a solid front axle on an...

Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

+4" HD Front Leaf Spring (For V6 and V8 Applications) Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and...

+3" HD Front Leaf Spring Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and exo-cages, V6 Toyota and Tacoma...

Knuckle Stud Hardware Kit (Six Shooter Super Metal) Stronger and longer than stock Toyota replacement knuckle studs and more affordable than our Magnum Studs these studs will provide great strength without breaking the bank. Each stud is constructed...

Longfield Chromoly Hub Gears Set (Inner and Outer / Solid Axle) When you run bigger tires, you put more strain and wear on your axles and hubs creating more failure points. Keep your rig running problem-free with Longfield OEM replacement hub gears...

Trail Safe Knuckle Ball Wiper Seal Tired of wiping big clumps of dirty sandy grease off of your knuckle balls after every trip? So are we. We asked our engineering department to look at the problems with the OEM design along with what was currently...

Longfield 27 Spline Birfield Axle Kit The Longfield birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The Longfield™ birfield housing is made out of forged 4340 chromoly steel...