Transfer Case Shifter w/ Knob If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter base, for shifter base (Top Shift), see...

Transfer Case Shift Base If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter, for shifter, see Part #: 2051665. This...

Speedometer Extension Cable When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedometer cables to a dual adapter. This product should...

Trail Creeper 4.7 Transfer Case (21-Spline / Top Shift / Single Case) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and rear output. Can be...

Trail Creeper 4.7 Transfer Case (23-Spline Input / Single Case / Top Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and rear output. Can...

Trail Creeper 4.7 Transfer Case (21-Spline Input / 4" Offset / Single Case / Forward Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and...

Trail Creeper 4.7 Transfer Case (23-Spline Input / 4" Offset / Single Case / Forward Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and...

Trail Creeper 4.7 Transfer Case (21-Spline Input / 4.5" Offset / Single Case / Forward Shift) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both front and...

Trail Creeper 4.7 Transfer Case (23-Spline Input / Forward Shift Fork / 4.5" Offset / Single Case) Single transfer case that features a 4.70 low range gear set. Each case is fully rebuilt and inspected. Triple drilled flanges are installed on both...

High Pinion Conversion Kits W/ Gear Choices Now building and running a High Pinion differential is so affordable, we have put together a conversion kit that will allow you to use your current V6 locker with our complete High Pinion conversion kits,...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

26" Extended Brake Line Kit (2 Front / 1 Rear) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...